Road Line Marking

Road Line Marking

Text, Symbols and Coloured Surfacing

SLOW, BUS STOP, cycle symbols, speed limit roundels, red and buff anti-skid surfacing and coloured cycle lanes.

Free Road Line Marking quote

No obligation. We only use your details to reply about this job.

Text, Symbols and Coloured Surfacing — Road Line Marking

What's involved

Text and symbols reinforce signs at the point drivers need them. Crews lay elongated lettering such as SLOW, STOP, KEEP CLEAR and LOOK RIGHT, along with cycle symbols, speed roundels and arrows, either hand-laid from thermoplastic or as preformed thermoplastic sheets fused with a gas torch. Lettering is deliberately stretched along the road so drivers read it correctly at speed. High-friction surfacing in red, buff or grey is often applied on approaches to junctions, crossings and bends, using a resin binder and calcined bauxite aggregate. Coloured surfacing for bus and cycle lanes uses a similar approach. Surfaces must be clean and dry, and resin systems need specific temperature windows. Text and symbols take minutes each, while high-friction surfacing is usually done under a full closure and can be trafficked once cured, typically within an hour or two.

How we handle it

  1. Survey and design check

    The crew reviews the road, existing markings and any drawings or traffic regulation orders. They check surface condition, widths, junctions and traffic levels, and flag anything that needs clarifying before pricing.

  2. Quote and permissions

    You receive a quote covering materials, lengths and traffic management. On public roads, the work needs highway authority permission and a booked slot, which can take several weeks to secure.

  3. Traffic management set-up

    On the day, signs, cones and any lights or closures are put in place. Residents and businesses are usually notified in advance, and parked vehicles cleared from the lines to be marked.

  4. Preparation and application

    Old markings are removed where layouts change, the surface is swept and dried, and new markings set out. Thermoplastic is applied by machine or screed, with glass beads for reflectivity.

  5. Inspection and reopening

    The crew checks line positions, widths and thickness, removes traffic management and reopens the road. Records and photographs can be supplied for asset management or highway adoption.

Price guide

Road line marking is priced by the linear metre for lines, by the item for text, symbols and studs, and by the square metre for hatching and coloured surfacing. Traffic management can be a significant part of the cost, especially on busy roads. Small jobs carry a minimum charge. These are typical UK guide prices for 2026.

  • Machine-applied white line (100 mm): £1.20–£3 per linear metre. Centre and edge lines on longer runs; short runs and hand-laid lines cost more.
  • Minimum mobilisation charge: from £450. Covers crew, boilers, vehicles and basic signing for small private road jobs.
  • Road studs supplied and fitted: £12–£30 each. Depends on stud type, quantity and whether old studs need removing.

Questions about text, symbols and coloured surfacing

What is high-friction surfacing?

High-friction surfacing is a coloured coating, often red or buff, made from resin and hard calcined bauxite aggregate. It increases skid resistance on approaches to junctions, crossings and bends, helping vehicles stop in a shorter distance. It is also used to highlight bus lanes and cycle lanes.

Get a free road line marking quote

Tell us what you need and we'll come back with a clear price.

Request a quote